Danfoss Icon2™1.3.13 - App Store
You'll be able to see results in few seconds.
Publisher Description
The Danfoss Icon2(TM) App is used in combination with the Danfoss Icon2(TM) Floor heating control system for easy and convenient commissioning and configuration.
Use the App for easy-to-follow step by step instructions and to select between the applications in the comprehensive catalogue floor heating / cooling applications.
The Danfoss Icon2(TM) App is required when using other than default settings on the Danfoss Icon2(TM) Main Controller or if an advanced application is required.
Version History • New feature to “View room data” directly in the Icon2 App as graphs, available to the user when the logs have been downloaded.
• New feature to download log file in open CSV format by using “Export logs”, when using “Send to Danfoss” the log file will remain encrypted.
• New feature to only download most recent logs, which typically contains 48h of data and is quicker to download.
• New feature to show remaining download time of logs.
• Improvement of the transfer speed for both log- and firmware OTA files (requires Main controller firmware version 1.92 or higher).
• New feature to inform the installer when the installation location has high wireless interference.
• Extended “The Expert Group” to also be available in Switzerland and Poland.
• Improvements to the banner shown when a room does not have a thermostat.
• Various bugfixes 1.3.13 Aug 20 General improvements 1.3.12 May 26 • Support for iOS 26
• Changes to include more data in the commissioning report
• Changes to the System overview page
• Changes to how Secondary MCs are added to existing installations
• Changes to Room overview page, when one room thermostat is connected to more than one outputs
• Changes to include an updated blinking pattern sheet
• Bugfix to avoid outputs with missing thermostat
• Bugfix to avoid room thermostats showing cooling mode in Icon2 App
• Bugfix to resume room thermostat pairing after lost Bluetooth connection with MC 1.3.11 Mar 2 • An animation is added to the app during the cleanup of memory, before firmware update
• The Main Controller will now be set to “Install mode” during firmware update, to ensure the process goes as smoothly as possible
• Secondary MCs, who are now shown also as Repeaters will have a label in front of their name, to make it clear to the user that it is a secondary mc.
• Various bugfixes 1.3.8 09/17/2025 - Bugfixes
- Latest available public Main controller firmware will be included in the app.
- New visual presentation of blinking patterns
- Updated technical drawings for the applications
- If user has problem adoption secondary MCs, app will suggest “common issues”
- When network test results where not all green, app will after 2nd test suggest adding a Repeater.
- On the room overview page, Secondary MCs are shown also under the Repeater section, as they are in fact acting also as repeaters. 1.3.7 08/14/2025 - Latest available public Main controller firmware will be included in the app.
- New visual presentation of blinking patterns
- Updated technical drawings for the applications
- If user has problem adoption secondary MCs, app will suggest “common issues”
- When network test results where not all green, app will after 2nd test suggest adding a Repeater.
- On the room overview page, Secondary MCs are shown also under the Repeater section, as they are in fact acting also as repeaters. 1.3.6 08/07/2025 - Included animations to the firmware update flow;
- Transfer of update file
- Installation of the new firmware
- Controller is restarting
- Activate Bluetooth if controller did not do it
- During Multi MC firmware update, recommend to factory reset controller after the update
- When user opens Icon2 App, it will check automatically if there is a new app version available and if so recommend updating.
- Various bug fixes 1.3.5 07/09/2025 - Improvements to the network test
- Explanation of the Main Controllers Blinking Patterns is now available from the main app page under the (i) button
- Included a warning of the importance for specific firmware updates
- Included reminder not to restart the main controller during firmware updates
- Included new animations to better explain user actions and behaviour of the main controller
- Bugfix to avoid situations where a room thermostat is not connected to an output/room
- Bugfixes in general 1.3.4 06/23/2025 - Change to the format of the installation report which is stored locally on the Main Controller.
- Bug fix to the network test related to when the installation uses multiple ZigBee repeaters.
- Various other smaller improvements 1.3.3 04/23/2025 - Improvement to flow of adding RTs, where the Bluetooth connection could be lost if you move too far away from the main controller, then as soon as the device is back within range it will reconnect
- Improvement to commissioning of a new building, with clearer description of the difference between Single vs Multi MC setups
- Fix to the network test
- Fix to wiring diagrams, where for some application the descriptions were missing
- Various bug fixes and workflow improvements 1.3.1 01/22/2025 Multi controller system support
Installation steps optimisation
Network test improvements 1.3.0 11/06/2024 - Added Spanish language support 1.2.1 07/24/2024 - QR code scanner optimization
- Support for 3rd party repeaters
- Join repeaters and RTs without QR code
- Possibility to abort when assigning devices
- Demo mode bugfix - heating / cooling setting
- Xcode 15 update
- Support for adding comments and photos to handover report
- Fixed an issue with scaling of launch screen 1.2.0 06/02/2024 - Minor UI related updates
- Stability improvements
- Improved QR scanner
- Possibility to rename Repeaters 1.1.10 02/29/2024 Serial number and HP optimizer status added to handover report.
Updated handling of Danfoss Identity Profile logon
Temperature setpoint refresh for room overview
Minor updates to graphical layout
Minor bugfixes and improvements
Update for demo mode 1.1.9 01/31/2024 Bug fixes 1.1.8 11/21/2023 Updated Privacy Policy URL
Added new image for Wired RT in Configure Room screen
Fixed app does not reconnect to MC after OTA, pairing alert is shown constantly now 1.1.7 11/09/2023 - Fixed uninstall repeater functionality if there is more then one repeater 1.1.6 09/22/2023 - Implement Czech language
- Privacy Policy in polish fixed
- Added Uninstall Repeater functionality 1.1.5 09/01/2023 Fixes a bug in some translations and links to Privacy Policy.
Adds updated functionality in Demo mode. 1.1.4 07/12/2023 Fixes an issue with wrong conversion factor of Zigbee signal in the network test. 1.1.3 07/05/2023 Bug fixes and performance improvements 1.1.2 06/30/2023 Application 7, 10, 17 and 20 actuators used for changeover are not shown as available for rooms 1.1.1 06/02/2023 1.0 05/24/2023
About Danfoss Icon2™
The company that develops Danfoss Icon2™ is Danfoss A/S. The latest version released by its developer is 1.3.13.
To install Danfoss Icon2™ on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-10-13 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the Danfoss Icon2™ as malware if the download link is broken.
How to install Danfoss Icon2™ on your iOS device:
- Click on the Continue To App button on our website. This will redirect you to the App Store.
- Once the Danfoss Icon2™ is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
- If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
- After Danfoss Icon2™ is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
- Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.
Program Details
System requirements
Download information
Pricing
Version History
version 1.3.13
posted on 2026-10-13
Version History • New feature to “View room data” directly in the Icon2 App as graphs, available to the user when the logs have been downloaded.
• New feature to download log file in open CSV format by using “Export logs”, when using “Send to Danfoss” the log file will remain encrypted.
• New feature to only download most recent logs, which typically contains 48h of data and is quicker to download.
• New feature to show remaining download time of logs.
• Improvement of the transfer speed for both log- and firmware OTA files (requires Main controller firmware version 1.92 or higher).
• New feature to inform the installer when the installation location has high wireless interference.
• Extended “The Expert Group” to also be available in Switzerland and Poland.
• Improvements to the banner shown when a room does not have a thermostat.
• Various bugfixes 1.3.13 Aug 20 General improvements 1.3.12 May 26 • Support for iOS 26
• Changes to include more data in the commissioning report
• Changes to the System overview page
• Changes to how Secondary MCs are added to existing installations
• Changes to Room overview page, when one room thermostat is connected to more than one outputs
• Changes to include an updated blinking pattern sheet
• Bugfix to avoid outputs with missing thermostat
• Bugfix to avoid room thermostats showing cooling mode in Icon2 App
• Bugfix to resume room thermostat pairing after lost Bluetooth connection with MC 1.3.11 Mar 2 • An animation is added to the app during the cleanup of memory, before firmware update
• The Main Controller will now be set to “Install mode” during firmware update, to ensure the process goes as smoothly as possible
• Secondary MCs, who are now shown also as Repeaters will have a label in front of their name, to make it clear to the user that it is a secondary mc.
• Various bugfixes 1.3.8 09/17/2025 - Bugfixes
- Latest available public Main controller firmware will be included in the app.
- New visual presentation of blinking patterns
- Updated technical drawings for the applications
- If user has problem adoption secondary MCs, app will suggest “common issues”
- When network test results where not all green, app will after 2nd test suggest adding a Repeater.
- On the room overview page, Secondary MCs are shown also under the Repeater section, as they are in fact acting also as repeaters. 1.3.7 08/14/2025 - Latest available public Main controller firmware will be included in the app.
- New visual presentation of blinking patterns
- Updated technical drawings for the applications
- If user has problem adoption secondary MCs, app will suggest “common issues”
- When network test results where not all green, app will after 2nd test suggest adding a Repeater.
- On the room overview page, Secondary MCs are shown also under the Repeater section, as they are in fact acting also as repeaters. 1.3.6 08/07/2025 - Included animations to the firmware update flow;
- Transfer of update file
- Installation of the new firmware
- Controller is restarting
- Activate Bluetooth if controller did not do it
- During Multi MC firmware update, recommend to factory reset controller after the update
- When user opens Icon2 App, it will check automatically if there is a new app version available and if so recommend updating.
- Various bug fixes 1.3.5 07/09/2025 - Improvements to the network test
- Explanation of the Main Controllers Blinking Patterns is now available from the main app page under the (i) button
- Included a warning of the importance for specific firmware updates
- Included reminder not to restart the main controller during firmware updates
- Included new animations to better explain user actions and behaviour of the main controller
- Bugfix to avoid situations where a room thermostat is not connected to an output/room
- Bugfixes in general 1.3.4 06/23/2025 - Change to the format of the installation report which is stored locally on the Main Controller.
- Bug fix to the network test related to when the installation uses multiple ZigBee repeaters.
- Various other smaller improvements 1.3.3 04/23/2025 - Improvement to flow of adding RTs, where the Bluetooth connection could be lost if you move too far away from the main controller, then as soon as the device is back within range it will reconnect
- Improvement to commissioning of a new building, with clearer description of the difference between Single vs Multi MC setups
- Fix to the network test
- Fix to wiring diagrams, where for some application the descriptions were missing
- Various bug fixes and workflow improvements 1.3.1 01/22/2025 Multi controller system support
Installation steps optimisation
Network test improvements 1.3.0 11/06/2024 - Added Spanish language support 1.2.1 07/24/2024 - QR code scanner optimization
- Support for 3rd party repeaters
- Join repeaters and RTs without QR code
- Possibility to abort when assigning devices
- Demo mode bugfix - heating / cooling setting
- Xcode 15 update
- Support for adding comments and photos to handover report
- Fixed an issue with scaling of launch screen 1.2.0 06/02/2024 - Minor UI related updates
- Stability improvements
- Improved QR scanner
- Possibility to rename Repeaters 1.1.10 02/29/2024 Serial number and HP optimizer status added to handover report.
Updated handling of Danfoss Identity Profile logon
Temperature setpoint refresh for room overview
Minor updates to graphical layout
Minor bugfixes and improvements
Update for demo mode 1.1.9 01/31/2024 Bug fixes 1.1.8 11/21/2023 Updated Privacy Policy URL
Added new image for Wired RT in Configure Room screen
Fixed app does not reconnect to MC after OTA, pairing alert is shown constantly now 1.1.7 11/09/2023 - Fixed uninstall repeater functionality if there is more then one repeater 1.1.6 09/22/2023 - Implement Czech language
- Privacy Policy in polish fixed
- Added Uninstall Repeater functionality 1.1.5 09/01/2023 Fixes a bug in some translations and links to Privacy Policy.
Adds updated functionality in Demo mode. 1.1.4 07/12/2023 Fixes an issue with wrong conversion factor of Zigbee signal in the network test. 1.1.3 07/05/2023 Bug fixes and performance improvements 1.1.2 06/30/2023 Application 7, 10, 17 and 20 actuators used for changeover are not shown as available for rooms 1.1.1 06/02/2023 1.0 05/24/2023
version 1.3.13
posted on 2026-08-22
Version History • New feature to “View room data” directly in the Icon2 App as graphs, available to the user when the logs have been downloaded.
• New feature to download log file in open CSV format by using “Export logs”, when using “Send to Danfoss” the log file will remain encrypted.
• New feature to only download most recent logs, which typically contains 48h of data and is quicker to download.
• New feature to show remaining download time of logs.
• Improvement of the transfer speed for both log- and firmware OTA files (requires Main controller firmware version 1.92 or higher).
• New feature to inform the installer when the installation location has high wireless interference.
• Extended “The Expert Group” to also be available in Switzerland and Poland.
• Improvements to the banner shown when a room does not have a thermostat.
• Various bugfixes 1.3.13 1d ago General improvements 1.3.12 May 26 • Support for iOS 26
• Changes to include more data in the commissioning report
• Changes to the System overview page
• Changes to how Secondary MCs are added to existing installations
• Changes to Room overview page, when one room thermostat is connected to more than one outputs
• Changes to include an updated blinking pattern sheet
• Bugfix to avoid outputs with missing thermostat
• Bugfix to avoid room thermostats showing cooling mode in Icon2 App
• Bugfix to resume room thermostat pairing after lost Bluetooth connection with MC 1.3.11 Mar 2 • An animation is added to the app during the cleanup of memory, before firmware update
• The Main Controller will now be set to “Install mode” during firmware update, to ensure the process goes as smoothly as possible
• Secondary MCs, who are now shown also as Repeaters will have a label in front of their name, to make it clear to the user that it is a secondary mc.
• Various bugfixes 1.3.8 09/17/2025 - Bugfixes
- Latest available public Main controller firmware will be included in the app.
- New visual presentation of blinking patterns
- Updated technical drawings for the applications
- If user has problem adoption secondary MCs, app will suggest “common issues”
- When network test results where not all green, app will after 2nd test suggest adding a Repeater.
- On the room overview page, Secondary MCs are shown also under the Repeater section, as they are in fact acting also as repeaters. 1.3.7 08/14/2025 - Latest available public Main controller firmware will be included in the app.
- New visual presentation of blinking patterns
- Updated technical drawings for the applications
- If user has problem adoption secondary MCs, app will suggest “common issues”
- When network test results where not all green, app will after 2nd test suggest adding a Repeater.
- On the room overview page, Secondary MCs are shown also under the Repeater section, as they are in fact acting also as repeaters. 1.3.6 08/07/2025 - Included animations to the firmware update flow;
- Transfer of update file
- Installation of the new firmware
- Controller is restarting
- Activate Bluetooth if controller did not do it
- During Multi MC firmware update, recommend to factory reset controller after the update
- When user opens Icon2 App, it will check automatically if there is a new app version available and if so recommend updating.
- Various bug fixes 1.3.5 07/09/2025 - Improvements to the network test
- Explanation of the Main Controllers Blinking Patterns is now available from the main app page under the (i) button
- Included a warning of the importance for specific firmware updates
- Included reminder not to restart the main controller during firmware updates
- Included new animations to better explain user actions and behaviour of the main controller
- Bugfix to avoid situations where a room thermostat is not connected to an output/room
- Bugfixes in general 1.3.4 06/23/2025 - Change to the format of the installation report which is stored locally on the Main Controller.
- Bug fix to the network test related to when the installation uses multiple ZigBee repeaters.
- Various other smaller improvements 1.3.3 04/23/2025 - Improvement to flow of adding RTs, where the Bluetooth connection could be lost if you move too far away from the main controller, then as soon as the device is back within range it will reconnect
- Improvement to commissioning of a new building, with clearer description of the difference between Single vs Multi MC setups
- Fix to the network test
- Fix to wiring diagrams, where for some application the descriptions were missing
- Various bug fixes and workflow improvements 1.3.1 01/22/2025 Multi controller system support
Installation steps optimisation
Network test improvements 1.3.0 11/06/2024 - Added Spanish language support 1.2.1 07/24/2024 - QR code scanner optimization
- Support for 3rd party repeaters
- Join repeaters and RTs without QR code
- Possibility to abort when assigning devices
- Demo mode bugfix - heating / cooling setting
- Xcode 15 update
- Support for adding comments and photos to handover report
- Fixed an issue with scaling of launch screen 1.2.0 06/02/2024 - Minor UI related updates
- Stability improvements
- Improved QR scanner
- Possibility to rename Repeaters 1.1.10 02/29/2024 Serial number and HP optimizer status added to handover report.
Updated handling of Danfoss Identity Profile logon
Temperature setpoint refresh for room overview
Minor updates to graphical layout
Minor bugfixes and improvements
Update for demo mode 1.1.9 01/31/2024 Bug fixes 1.1.8 11/21/2023 Updated Privacy Policy URL
Added new image for Wired RT in Configure Room screen
Fixed app does not reconnect to MC after OTA, pairing alert is shown constantly now 1.1.7 11/09/2023 - Fixed uninstall repeater functionality if there is more then one repeater 1.1.6 09/22/2023 - Implement Czech language
- Privacy Policy in polish fixed
- Added Uninstall Repeater functionality 1.1.5 09/01/2023 Fixes a bug in some translations and links to Privacy Policy.
Adds updated functionality in Demo mode. 1.1.4 07/12/2023 Fixes an issue with wrong conversion factor of Zigbee signal in the network test. 1.1.3 07/05/2023 Bug fixes and performance improvements 1.1.2 06/30/2023 Application 7, 10, 17 and 20 actuators used for changeover are not shown as available for rooms 1.1.1 06/02/2023 1.0 05/24/2023
version 1.3.12
posted on 2026-07-25
Version History General improvements 1.3.12 May 26 • Support for iOS 26
• Changes to include more data in the commissioning report
• Changes to the System overview page
• Changes to how Secondary MCs are added to existing installations
• Changes to Room overview page, when one room thermostat is connected to more than one outputs
• Changes to include an updated blinking pattern sheet
• Bugfix to avoid outputs with missing thermostat
• Bugfix to avoid room thermostats showing cooling mode in Icon2 App
• Bugfix to resume room thermostat pairing after lost Bluetooth connection with MC 1.3.11 Mar 2 • An animation is added to the app during the cleanup of memory, before firmware update
• The Main Controller will now be set to “Install mode” during firmware update, to ensure the process goes as smoothly as possible
• Secondary MCs, who are now shown also as Repeaters will have a label in front of their name, to make it clear to the user that it is a secondary mc.
• Various bugfixes 1.3.8 09/17/2025 - Bugfixes
- Latest available public Main controller firmware will be included in the app.
- New visual presentation of blinking patterns
- Updated technical drawings for the applications
- If user has problem adoption secondary MCs, app will suggest “common issues”
- When network test results where not all green, app will after 2nd test suggest adding a Repeater.
- On the room overview page, Secondary MCs are shown also under the Repeater section, as they are in fact acting also as repeaters. 1.3.7 08/14/2025 - Latest available public Main controller firmware will be included in the app.
- New visual presentation of blinking patterns
- Updated technical drawings for the applications
- If user has problem adoption secondary MCs, app will suggest “common issues”
- When network test results where not all green, app will after 2nd test suggest adding a Repeater.
- On the room overview page, Secondary MCs are shown also under the Repeater section, as they are in fact acting also as repeaters. 1.3.6 08/07/2025 - Included animations to the firmware update flow;
- Transfer of update file
- Installation of the new firmware
- Controller is restarting
- Activate Bluetooth if controller did not do it
- During Multi MC firmware update, recommend to factory reset controller after the update
- When user opens Icon2 App, it will check automatically if there is a new app version available and if so recommend updating.
- Various bug fixes 1.3.5 07/09/2025 - Improvements to the network test
- Explanation of the Main Controllers Blinking Patterns is now available from the main app page under the (i) button
- Included a warning of the importance for specific firmware updates
- Included reminder not to restart the main controller during firmware updates
- Included new animations to better explain user actions and behaviour of the main controller
- Bugfix to avoid situations where a room thermostat is not connected to an output/room
- Bugfixes in general 1.3.4 06/23/2025 - Change to the format of the installation report which is stored locally on the Main Controller.
- Bug fix to the network test related to when the installation uses multiple ZigBee repeaters.
- Various other smaller improvements 1.3.3 04/23/2025 - Improvement to flow of adding RTs, where the Bluetooth connection could be lost if you move too far away from the main controller, then as soon as the device is back within range it will reconnect
- Improvement to commissioning of a new building, with clearer description of the difference between Single vs Multi MC setups
- Fix to the network test
- Fix to wiring diagrams, where for some application the descriptions were missing
- Various bug fixes and workflow improvements 1.3.1 01/22/2025 Multi controller system support
Installation steps optimisation
Network test improvements 1.3.0 11/06/2024 - Added Spanish language support 1.2.1 07/24/2024 - QR code scanner optimization
- Support for 3rd party repeaters
- Join repeaters and RTs without QR code
- Possibility to abort when assigning devices
- Demo mode bugfix - heating / cooling setting
- Xcode 15 update
- Support for adding comments and photos to handover report
- Fixed an issue with scaling of launch screen 1.2.0 06/02/2024 - Minor UI related updates
- Stability improvements
- Improved QR scanner
- Possibility to rename Repeaters 1.1.10 02/29/2024 Serial number and HP optimizer status added to handover report.
Updated handling of Danfoss Identity Profile logon
Temperature setpoint refresh for room overview
Minor updates to graphical layout
Minor bugfixes and improvements
Update for demo mode 1.1.9 01/31/2024 Bug fixes 1.1.8 11/21/2023 Updated Privacy Policy URL
Added new image for Wired RT in Configure Room screen
Fixed app does not reconnect to MC after OTA, pairing alert is shown constantly now 1.1.7 11/09/2023 - Fixed uninstall repeater functionality if there is more then one repeater 1.1.6 09/22/2023 - Implement Czech language
- Privacy Policy in polish fixed
- Added Uninstall Repeater functionality 1.1.5 09/01/2023 Fixes a bug in some translations and links to Privacy Policy.
Adds updated functionality in Demo mode. 1.1.4 07/12/2023 Fixes an issue with wrong conversion factor of Zigbee signal in the network test. 1.1.3 07/05/2023 Bug fixes and performance improvements 1.1.2 06/30/2023 Application 7, 10, 17 and 20 actuators used for changeover are not shown as available for rooms 1.1.1 06/02/2023 1.0 05/24/2023
version 1.3.11
posted on 2026-03-02
• Support for iOS 26
• Changes to include more data in the commissioning report
• Changes to the System overview page
• Changes to how Secondary MCs are added to existing installations
• Changes to Room overview page, when one room thermostat is connected to more than one outputs
• Changes to include an updated blinking pattern sheet
• Bugfix to avoid outputs with missing thermostat
• Bugfix to avoid room thermostats showing cooling mode in Icon2 App
• Bugfix to resume room thermostat pairing after lost Bluetooth connection with MC
version 1.3.8
posted on 2025-09-17
Sep 17, 2025
Version 1.3.8
• An animation is added to the app during the cleanup of memory, before firmware update
• The Main Controller will now be set to “Install mode” during firmware update, to ensure the process goes as smoothly as possible
• Secondary MCs, who are now shown also as Repeaters will have a label in front of their name, to make it clear to the user that it is a secondary mc.
• Various bugfixes
version 1.3.8
posted on 2025-09-17
• An animation is added to the app during the cleanup of memory, before firmware update
• The Main Controller will now be set to “Install mode” during firmware update, to ensure the process goes as smoothly as possible
• Secondary MCs, who are now shown also as Repeaters will have a label in front of their name, to make it clear to the user that it is a secondary mc.
• Various bugfixes
version 1.3.7
posted on 2025-08-14
Aug 14, 2025
Version 1.3.7
- Bugfixes
- Latest available public Main controller firmware will be included in the app.
- New visual presentation of blinking patterns
- Updated technical drawings for the applications
- If user has problem adoption secondary MCs, app will suggest “common issues”
- When network test results where not all green, app will after 2nd test suggest adding a Repeater.
- On the room overview page, Secondary MCs are shown also under the Repeater section, as they are in fact acting also as repeaters.
version 1.3.3
posted on 2025-04-23
Apr 23, 2025
Version 1.3.3
- Change to the format of the installation report which is stored locally on the Main Controller.
- Bug fix to the network test related to when the installation uses multiple ZigBee repeaters.
- Various other smaller improvements
version 1.3.1
posted on 2025-01-22
Jan 22, 2025
Version 1.3.1
- Improvement to flow of adding RTs, where the Bluetooth connection could be lost if you move too far away from the main controller, then as soon as the device is back within range it will reconnect
- Improvement to commissioning of a new building, with clearer description of the difference between Single vs Multi MC setups
- Fix to the network test
- Fix to wiring diagrams, where for some application the descriptions were missing
- Various bug fixes and workflow improvements
version 1.3.0
posted on 2024-11-06
Nov 6, 2024
Version 1.3.0
Multi controller system support
Installation steps optimisation
Network test improvements
Disclaimer
Official App Store Link
We do not host Danfoss Icon2™ on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for Danfoss Icon2™ is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
